- CBX-LALALA HONDA Mortorcycle CBX1000 FCR Carburetor
- Biker&Others
- The recommended installation position for the air-fuel ratio gauge is at the center of the meter.
- I went to the 2023 - 11th BITO JB-POWER Meeting.
- Motorcycle Intake Systems - Which is Better, Fuel Injection or Carburetor? What are the Differences?
- I found a box for a CBX1000 FCR from over 20 years ago in the back of my room.
- FCR tuning - Acceleration pump adjustment - If it is too fast, it will hit the throttle valve.
- Do you have the parts list, service manual, electrical diagram, and FCR tuning manual?
- Naked style - CBX1000 looks cooler without a cowl
- Initial tunings of CBX1000 FCR33 shipped by BITO. CBX1000 bikers will be happy after reading this.
- AS Uotani SP2-gap adjustment and iridium plug
- Made by Kitako - Quick fuel joint for fuel line
- The ride height of the CBX1000: I want to raise it to secure a greater lean angle.
- GUN125-Transplanted the horn from the new Hilux
- Leather Jacket - Vanson - One Star
- Helmet Sales in Japan - SIMPSON - Blue Star
- Okayama International Circuit - Power Ride - 2020-09-20
- CBX1000 Photos - At Personal Garage - Many Photos
- CBX1000
- FCR Tuning - Should the Slow Jet Be Changed According to the Season?
- FCR Tuning - To What Extent Should Carburetor Synchronization Be Done?
- With the FCR, you can start the engine even on early winter mornings.
- Are the standard brakes of classic motorcycles low in performance? I customized my brakes.
- For FCR Beginners - Don’t use the red Velocity Stack on the street as it is!
- FCR Tuning - When changing the straight diameter of the jet needle, also adjust the clip position.
- The recommended installation position for the air-fuel ratio gauge is at the center of the meter.
- FCR Tuning - Changing Slow Jets, Adjusting Air Screw and Pilot Screw - 2023-11-09
- FCR Tuning - If the pilot screw is set to 1.00 turns out, it may not be adjusted sufficiently.
- I went to the 2023 - 11th BITO JB-POWER Meeting.
- FCR Tuning - Regularly resetting the air screw and pilot screw can improve performance.
- FCR Tuning - Having an air-fuel ratio gauge is useful for adjusting the pilot screw.
- Does the scope of the FCR tuning manual affect the throttle opening or the valve opening?
- FCR Tuning - To what extent does the main jet affect the throttle opening range? - 2023-09-19
- FCR Tuning - Adjusting Accelerator Pump Discharge Timing and Straight - 2023-09-12
- The throttle opening and throttle valve opening of the FCR carburetor are not directly proportional.
- With the quick turn throttle housing, you can set the throttle free play to 0mm!
- Throttle grip wiring - The FCR is a push-pull carburetor. Its direct operational feel is very appealing.
- FCR Tuning - Testing 6 Variations of Accelerator Pump Diaphragm - 2023-08-22
- Adjustment of Motorcycle Throttle Free Play
- FCR Tuning - Adjusting the air screw to the appropriate setting after changing the slow jet - 2023-08-13
- How much gasoline is accumulated in the float chamber of the FCR carburetor?
- FCR Tuning - Re-synchronization after adjusting the throttle cable - 2023-08-01
- FCR Tuning - Tuning the main jet at full throttle is fun.
- Spark Plug Replacement - The Idling of Carbureted Engines Smells Like Gasoline
- FCR Tuning - Adjusting the Jets Slightly Leaner for Summer
- FCR Tuning - Full Throttle! How lean can the main jet go? Will the engine hold up?
- 3 Reasons Why Used FCR Carburetors Can Be Used
- FCR requires a filter for street use. Constant use of a velocity stack is not recommended.
- FCR Tuning - Acceleration Pump Discharge Timing Adjustment - Finalized as is - 2023-06-20
- FCR Tuning - Test Ride with Awareness of Shift Position - 2023-06-17
- Carburetor synchronization is not the kind of maintenance where you can fail – the challenging part is the preparation.
- FCR Tuning - Adjusting throttle openings below 1/4 with the air screw, slow jet, and jet needle straight diameter - 2023-06-11
- FCR Tuning - Jet Needle Clip Position and Accelerator Pump Diaphragm Replacement - 2023-06-10
- FCR Tuning - Adjusting Accelerator Pump Timing and Air Screw - 2023-06-05
- Which is better, the Keihin FCR carburetor or the CRS carburetor? Of course, the FCR carburetor.
- FCR Tuning - Adjust the air screw to be slightly lean within the possible range, then adjust the accelerator pump - 2023-05-27
- FCR Tuning - Changing the Straight Diameter of the JN Jet Needle - 2023-05-09
- FCR Tuning - JN Jet Needle Straight Diameter and Clip Position - 2023-05-03
- FCR Tuning - Carburetor Synchronization - Is the Balance of Your Vacuum Gauge Correct?
- Pingel Power-Flo fuel petcock for FCR – My favorite part
- FCR Tuning - Is an Air/Fuel Ratio Meter (A/F Meter) a Necessary Equipment?
- FCR Tuning - Main Jet Change - 2023-04-14
- My impression of changing the CBX1000's clutch housing to the later model(SC06).
- FCR Tuning - 2023-04-12 - Considering the Jet Needle Strategy
- Work at the rental pit on 2023-03-27 - Synchronization of the FCR carburetor and spark plug replacement were completed.
- What are the disadvantages of a racing carburetor? - Regular maintenance is required.
- Work at the rental pit on 2023-03-25 - Installing the FCR and removing the front tire
- Work at the rental pit - 2023-03-24 - Removal of FCR carburetor. Removal of throttle valve.
- Which racing carburetor should you choose? FCR, TMR, TMR-MJN, CRS, or others…
- FCR Carburetor Tuning - Slightly rich or too rich. It's best to keep it at a slightly rich level.
- Is it easy for beginners to tune an FCR carburetor?
- Motorcycle Intake Systems - Which is Better, Fuel Injection or Carburetor? What are the Differences?
- Installing the cowl on CBX1000 is not difficult.
- I want to synchronize the FCR carburetor myself after installing it.
- FCR tuning - It is easier to make a judgment if you do the final check by test riding with two motorcycles.
- Long-term storage of the FCR carburetor - Drain the gasoline from the drain bolt.
- FCR Tuning - For street use, be sure to check the throttle response at the initial opening.
- FCR Tuning - Easily Adjusting for Each Season
- Will fuel efficiency improve if I switch from a normal carburetor to an FCR carburetor?
- FCR Tuning - Please check if the pilot screw is working correctly
- FCR Tuning - The air screw is set to one turn back as a baseline. How much should it be adjusted?
- FCR settings - The symptoms of being too rich while riding are easy to recognize if you pay attention.
- FCR - Once you have installed Quick turn throttle, change the tuning accordingly
- FCR Tuning - Symptoms of too rich and too lean - Air-fuel ratio meter also recommended
- 4 points to note about gasoline leaks during FCR tuning
- Improving Fuel Efficiency with FCR Carburetors
- I love CBX1000's painted accessories.
- FCR - Tuning with easy-access jets in mind
- FCR Tuning - Will tuning improve the return to idle?
- If I use an FCR-Foam Air Filter Sock, will it be okay to use it in the rain?
- I found a box for a CBX1000 FCR from over 20 years ago in the back of my room.
- FCR Tuning - What is the air-fuel ratio at idle?
- FCR Tuning - Tuning that becomes worse due to jet changes is within the acceptable range of effects.
- FCR tuning - If you make the jet needle straight diameter lean, it may be pointless to make the jet rich…
- I got the spark plug wet! If you use the accelerator pump too much, you will get into big trouble.
- FCR Tuning - Jet Search Order from Initial Tuning
- FCR Tuning - Synchronizing six FCRs is the best part of tuning
- FCR Tuning - The pilot screw can be fully closed to allow idling.
- FCR Tuning - Air Screw Optimization
- The difficulty of tuning an FCR carburetor varies depending on whether you're using a quick throttle or a standard throttle.
- The surprising moment when I tried tuning my own FCR - for beginners - Failures 3/3
- The surprising moment when I tried tuning my own FCR - for beginners - Failures 2/3
- The surprising moment when I tried tuning my own FCR - for beginners - Failures 1/3
- The surprising moment when I tuned my FCR by myself - for beginners - Good things
- FCR Tuning - Full throttle! Check the main jet for each gear
- FCR Tuning - Tuning becomes easier if you install an air-fuel ratio meter.
- FCR Tuning - Look at the air-fuel ratio during acceleration, not partial
- FCR Tuning - The tuning of the BITO is excellent when shipped!
- FCR Tuning - Where should I tune the main jet at full throttle?
- Selecting a jet needle for the CBX1000 FCR model - I want to choose something other than the 90FXM
- Riding is fun when you attach a cowl to a naked motorcycle
- FCR Tuning - How to Adjust the AS Air Screw and PS Pilot Screw
- Does the CBX1000 require an FCR accelerator pump?
- Frame mount cowl installation cost - for CBX400F Integra installation
- FCR Tuning - Throttle opening 1/16 determined by straight diameter and slow jet
- FCR lifespan. It was fine even after 20 years of use.
- FCR tuning - I bought an acceleration pump diaphragm so I'll compare the sizes
- CBX1000 FCR main jet full throttle tuning
- Installing an FCR on a CBX1000 - 10 Essential Tips for Serious Tuning
- Buying a CBX1000 FCR - How to tune for the first time
- FCR Tuning - Jet needle changed to 90FTN. I was concerned about the straight diameter - 2022-11-15
- FCR - The fuel line should be angled so that fuel can flow easily.
- FCR Tuning - Adjust the air screw with a digital tachometer - 2022-11-10
- Notes on changing FCR slow jet
- FCR tuning - Jet needle replacement - Up change - 2022-11-08
- FCR Tuning - Tuning throttle opening from 1/16 to 1/8 - 2022-11-06
- FCR Tuning - The number of clip stages of the jet needle is determined by the driving feeling
- FCR tuning - Carburetor synchronization work - 2022-11-02
- FCR Tuning - Slow Jet Selection - Start with the pilot screw back at about 1.0 turn
- FCR Tuning - Cold Startability - Air Screw and Pilot Screw Adjustment - 2022-11-01
- Changed the FCR acceleration pump diaphragm. Visual inspection is important. Changes in total discharge volume are difficult to understand
- FCR Tuning - Apply filter oil to the Foam Air Filter Sock at the end
- FCR Tuning - Adjust and synchronize air screw and pilot screw - 2022-10-27
- FCR Tuning - Test run and screw adjustment - 2022-10-25
- Tools required for CBX1000 FCR tuning
- FCR Tuning - Slow Jet Change - 2022-10-24
- FCR carburetor tuning - test run on the expressway and Kizuna Stadium in Iwakuni
- FCR tuning - You can tell whether the accelerator pump is rich or lean with the air-fuel ratio meter.
- CBX1000 photo and FCR acceleration pump discharge timing tuning
- FCR tuning - jet needle clip stage number change - 2022-10-16
- FCR Tuning - Acceleration Pump Discharge Timing Adjustment - 2022-10-12
- FCR Tuning - Trial run of pilot screw Slightly rich
- FCR Tuning - Change slow jet from 40 to 42 - 2022-10-08
- FCR Tuning - An Easy Way to Turn Off the Accelerator Pump
- Amon 5-pole slim relay surge coil countermeasures
- FCR-PS Isn't it too rich? How to decide between pilot screw and slow jet
- FCR tuning - Acceleration pump adjustment - If it is too fast, it will hit the throttle valve.
- FCR Tuning - Synchronization - 2022-10-03
- CBX400F Integra cowl installation - leftover parts for naked
- FCR Tuning - Test run after changing MJ main jet
- FCR Tuning - Adjusting the Air Screw After Carburetor Synchronization - 2022-10-01
- I will write various things about the Velocity Stack of city riding-FCR. Talk about vertical orientation and processing, etc.
- Repaint - The illustration I provided when requesting the repaint.
- Adjust the balance of the multi-vacuum gauge
- FCR Tuning - Test Run - Adjust AS - 2022-09-29
- FCR Tuning - Changed SJ from 38 to 40. PS pilot screw adjustment - 2022-09-28
- Since I changed the FCR - SJ, I checked the startability and touched the PS - 2022-09-28
- FCR tuning - Change and synchronize SJ and MJ - 2022-09-27
- FCR - Test run on the expressway - Check the condition of the main jet
- Do not set FCR - strictly prohibited before touring.
- 3 things I liked about CBX1000 with cowl specification
- FCR tuning - Considering the seasons of summer and winter when touching AS and PS - 2022-09-17
- Do you have the parts list, service manual, electrical diagram, and FCR tuning manual?
- Naked style - CBX1000 looks cooler without a cowl
- FCR6 synchronization and fuel subtank
- Three advantages of converting CBX1000 to FCR
- Test drive the CBX1000 and head to the rental garage
- About taper angle and FCR tuning - MJ confirmation from test run - How much does MJ influence? 2022-08-20
- About FCR-PS. Idle port, slow port and air-fuel ratio at idling
- What is the appeal of motorcycle carburetor specifications?
- FCR tuning - SJ and MJ change - 2022-08-15
- Should I change the taper angle and cut-up of FCR? Check the number of clip stages first.
- FCR tuning - AS air screw adjustment - 2022-08-03
- Photos of CBX1000 cowl specifications are posted.
- FCR tuning - screw adjustment and AS Uotani SP2 dial tuning - 2022-07-29
- FCR tuning - AS and PS adjustment during test run - 2022-07-28
- FCR - JN clip stage number change - 2nd time today - 2022-07-27
- FCR - Test run - Mesh jacket is pretty good - 2022-07-27
- FCR tuning - PS pilot screw changes - 2022-07-25
- Comparison of idle port and slow port of FCR carburetor
- In the case of a racing carburetor such as FCR, can it be run in the rain with a Velocity Stack specification? Should I do it?
- FCR tuning - Use BITO's default jet needle. I did a test drive with a higher cut-off.
- Comparison of FCR-jet needle cut-up. Let's take a look at the thickness of the small standard 90FXM and 90FTM.
- tuning of FCR - If the small jet needle is F taper, you cannot choose the cut-up. Round up comparison
- CBX1000 FCR tuning jet needle replacement. Impressions from a test run after changing the taper angle
- [FCR] Jet needles should be purchased from BITO.
- Initial tunings of CBX1000 FCR33 shipped by BITO. CBX1000 bikers will be happy after reading this.
- I go to vote and then ride a motorcycle. Test run-FCR tuning - 2022-07-10
- I remove the fuel tank and clean the motorcycle.
- FCR tunings - all changes - 2022-07-09
- Test run - Throttle opening 1/2 - MJ change - 2022-07-08
- FCR - tuning - MJ and JN influence - 2022-07-08
- FCR tuning-Change Accelerator Pump diaphragm and test run
- FCR tuning - Acceleration pump adjustment - 2022-07-06
- Is a Quick throttle necessary for FCR?
- FCR tuning - Lean slow jet - Changed from 48 to 40 - 2022-07-03
- Comparison of bikini cowl and upper cowl
- Do you install a cowl on your motorcycle?
- FCR-tuning - With Boko - 2022-07-02
- FCR tuning - AS Adjustment - 2022-06-25
- Verifying the impact of CBX1000 PS
- pilot screw adjusting tool processing
- FCR-Synchronous screw nut limits and SEP bearing guide
- FCR Carburetor - The effects of the balance pipe
- FCR tuning - MJ main jet change - 2022-06-23
- FCR tuning - MJ or JN - 2022-06-20
- FCR tuning - Drain bolt O-ring replacement
- FCR Tuning - Changed from MJ(Main jet) 125 to 120 - 2022-06-18
- Rental Garage - CBX400F Integra Cowl Specifications
- FCR-MJ main jet purchase 36 pieces
- FCR - Synchronization - Taper Gauge
- FCR - SJ count tuning - tuning parts list available
- FCR - tunings when installing Foam Air Filter Sock
- FCR-tuning luggage minimum
- FCR - tuning - AS Uotani SP2 ignition timing [1] - 2022-06-12
- FCR-tunings Sheet-Google Sheets Spreadsheet
- FCR - tuning - 2022-06-10
- AS Uotani SP2-gap adjustment and iridium plug
- AS Uotani SP2-Dial tunings
- FCR - Test run with acceleration pump adjustment - 2022-06-09
- FCR-6-synchronization-balanced pipe
- FCR - Adjust the diaphragm of the accelerator pump
- Made by Kitako - Quick fuel joint for fuel line
- Test run with FCR - MJ throttle fully open - 2022-06-04
- CBX1000 - 2022/06/05 - Cleaning is fun.
- Old folk house cafe Matsubaya in Masuda City, Shimane Prefecture
- FCR-How to fix overflow
- FCR-Fuel Level Adjustment
- FCR tuning - Jet Needle - 2022-06-02
- FCR fuel filter
- Beautiful photos - at the motorcycle exhibition hall
- CBX1000 line on front fender
- Equip a motorcycle with a dashcam (drive recorder).
- FCR Tuning - Slow jet changed from 48 to 55 - 2022-05-23
- Heading to Hattendo Village in Mihara City, Hiroshima Prefecture for a test run of the FCR.
- About engine overhaul of CBX1000
- Replace the headlight bulb with an LED and switch the headlight to a multi-reflector.
- Jet needle clip change - 2022-05-18
- Scope of influence of FCR's MJ main jet
- Photo of a CBX1000 - taken at Bayside Beach, Hiroshima Prefecture, on 2021-01-10.
- Installing the CB1100F front-end assembly on the CBX1000
- Yoshimura Progress 2 Oil Temperature Gauge - Woodstock Mount Bracket
- PINGEL cock flow comparison PINGEL1/4
- Brembo - Corsa Corta installed
- I had the head cover chrome plated.
- Test run after installing HONDA CBX400F cowl - air screw adjustment
- CBX400F cowl-improvement edition
- CBX400F Integra cowl installation completed edition
- CBX400F Integra cowl installation ~Test run~
- Change from single horn to double horn
- Hiroshima Prefecture - Roadside Station Spa Rakan - CB-F Mini Meeting
- Rebuilt Turn Signals - CBX1000
- CBX400F Integra cowl installation troubles
- CBX400F Integra cowl reinstallation edition
- The ride height of the CBX1000: I want to raise it to secure a greater lean angle.
- GUN125-Transplanted the horn from the new Hilux
- Clutch plate replacement for the CBX1000.
- Leather Jacket - Vanson - One Star
- Helmet Sales in Japan - SIMPSON - Blue Star
- CBX400F Integra cowl installation edition
- FCR - tuning JN - 2022-04-23 - Video available
- Touring Spot - Hiroshima Motorcycle Shrine
- FCR - tuning JN - 2022-04-22
- Trouble installing generator rebuild
- FCR Carburetor - Throttle Valve Seal Replacement
- CBX400F Integra Cowl Installation Temporary Edition
- CBX400F Integra cowl installation creation edition
- PLX-DM6-Air fuel ratio meter-A/F meter installation
- Rear brake handling, floating brake, etc.
- Okayama International Circuit - Power Ride - 2020-09-20
- Night view spot in Hiroshima - Otake City - NIHON SEISHI Factory
- Added Pingelcock - read properly and you'll be happy.
- Creating a turn signal position lamp on/off for a Honda motorcycle
- HONDA CBX1000 Photos 2022-April
- FCR test run, Yasuno Station
- FCR-SJ Slow Jet – FCR Carburetor Installation
- FCR-Changed SJ slow jet. 2022-04-15
- FCR-Install SEP bearing guide on CBX1000!
- CBX1000 Photos - At Personal Garage - Many Photos
- Brembo CNC brake caliper installation
- Replace the exterior with a repainted one
- Install Quick throttle-Active Type3
- table comstar wheel Polished manual work
- A Story About a Vehicle Inspection: Speedometer Failed Four Times
- FCR Tuning - Lean main jet - Changed from 122 to 118 - 2022-04-11
- Yoshimura Progress 2 Oil Temperature Gauge - Measures outside temperature.
- FCR tunings - Acceleration and Power Air Fuel Ratio. Bring 12.5 to 13.0 during acceleration.
- SYARINMURA2022 - 2022-04-10
- FCR synchronization and 6-series vacuum gauge
- FCR Tuning - Adjust the throttle return and turn the pilot screw
- A classic from Hiroshima City, Hiroshima Prefecture. Touring to Mt. Sanbe, Shimane Prefecture. Nima-cho Touring, Ota City, Shimane Prefecture
- CBX1000 Night Ride - Photo Gallery of Headlights and Lamps
- My CBX1000.Normal style is the theme.
- Cowl
- Installing the cowl on CBX1000 is not difficult.
- I love CBX1000's painted accessories.
- Riding is fun when you attach a cowl to a naked motorcycle
- Frame mount cowl installation cost - for CBX400F Integra installation
- CBX400F Integra cowl installation - leftover parts for naked
- Repaint - The illustration I provided when requesting the repaint.
- 3 things I liked about CBX1000 with cowl specification
- Naked style - CBX1000 looks cooler without a cowl
- Test drive the CBX1000 and head to the rental garage
- Photos of CBX1000 cowl specifications are posted.
- Comparison of bikini cowl and upper cowl
- Do you install a cowl on your motorcycle?
- Rental Garage - CBX400F Integra Cowl Specifications
- CBX1000 - 2022/06/05 - Cleaning is fun.
- CBX1000 line on front fender
- Test run after installing HONDA CBX400F cowl - air screw adjustment
- CBX400F cowl-improvement edition
- CBX400F Integra cowl installation completed edition
- CBX400F Integra cowl installation ~Test run~
- Change from single horn to double horn
- CBX400F Integra cowl installation troubles
- CBX400F Integra cowl reinstallation edition
- GUN125-Transplanted the horn from the new Hilux
- CBX400F Integra cowl installation edition
- CBX400F Integra Cowl Installation Temporary Edition
- CBX400F Integra cowl installation creation edition
- Replace the exterior with a repainted one
- FCR
- FCR Tuning - Should the Slow Jet Be Changed According to the Season?
- FCR Tuning - To What Extent Should Carburetor Synchronization Be Done?
- With the FCR, you can start the engine even on early winter mornings.
- For FCR Beginners - Don’t use the red Velocity Stack on the street as it is!
- FCR Tuning - When changing the straight diameter of the jet needle, also adjust the clip position.
- The recommended installation position for the air-fuel ratio gauge is at the center of the meter.
- FCR Tuning - Changing Slow Jets, Adjusting Air Screw and Pilot Screw - 2023-11-09
- FCR Tuning - If the pilot screw is set to 1.00 turns out, it may not be adjusted sufficiently.
- FCR Tuning - Regularly resetting the air screw and pilot screw can improve performance.
- FCR Tuning - Having an air-fuel ratio gauge is useful for adjusting the pilot screw.
- Does the scope of the FCR tuning manual affect the throttle opening or the valve opening?
- FCR Tuning - To what extent does the main jet affect the throttle opening range? - 2023-09-19
- FCR Tuning - Adjusting Accelerator Pump Discharge Timing and Straight - 2023-09-12
- The throttle opening and throttle valve opening of the FCR carburetor are not directly proportional.
- With the quick turn throttle housing, you can set the throttle free play to 0mm!
- Throttle grip wiring - The FCR is a push-pull carburetor. Its direct operational feel is very appealing.
- FCR Tuning - Testing 6 Variations of Accelerator Pump Diaphragm - 2023-08-22
- Adjustment of Motorcycle Throttle Free Play
- FCR Tuning - Adjusting the air screw to the appropriate setting after changing the slow jet - 2023-08-13
- How much gasoline is accumulated in the float chamber of the FCR carburetor?
- FCR Tuning - Re-synchronization after adjusting the throttle cable - 2023-08-01
- FCR Tuning - Tuning the main jet at full throttle is fun.
- Spark Plug Replacement - The Idling of Carbureted Engines Smells Like Gasoline
- FCR Tuning - Adjusting the Jets Slightly Leaner for Summer
- FCR Tuning - Full Throttle! How lean can the main jet go? Will the engine hold up?
- 3 Reasons Why Used FCR Carburetors Can Be Used
- FCR requires a filter for street use. Constant use of a velocity stack is not recommended.
- FCR Tuning - Acceleration Pump Discharge Timing Adjustment - Finalized as is - 2023-06-20
- FCR Tuning - Test Ride with Awareness of Shift Position - 2023-06-17
- Carburetor synchronization is not the kind of maintenance where you can fail – the challenging part is the preparation.
- FCR Tuning - Adjusting throttle openings below 1/4 with the air screw, slow jet, and jet needle straight diameter - 2023-06-11
- FCR Tuning - Jet Needle Clip Position and Accelerator Pump Diaphragm Replacement - 2023-06-10
- FCR Tuning - Adjusting Accelerator Pump Timing and Air Screw - 2023-06-05
- Which is better, the Keihin FCR carburetor or the CRS carburetor? Of course, the FCR carburetor.
- FCR Tuning - Adjust the air screw to be slightly lean within the possible range, then adjust the accelerator pump - 2023-05-27
- FCR Tuning - Changing the Straight Diameter of the JN Jet Needle - 2023-05-09
- FCR Tuning - JN Jet Needle Straight Diameter and Clip Position - 2023-05-03
- FCR Tuning - Carburetor Synchronization - Is the Balance of Your Vacuum Gauge Correct?
- Pingel Power-Flo fuel petcock for FCR – My favorite part
- FCR Tuning - Is an Air/Fuel Ratio Meter (A/F Meter) a Necessary Equipment?
- FCR Tuning - Main Jet Change - 2023-04-14
- FCR Tuning - 2023-04-12 - Considering the Jet Needle Strategy
- Work at the rental pit on 2023-03-27 - Synchronization of the FCR carburetor and spark plug replacement were completed.
- What are the disadvantages of a racing carburetor? - Regular maintenance is required.
- Work at the rental pit on 2023-03-25 - Installing the FCR and removing the front tire
- Work at the rental pit - 2023-03-24 - Removal of FCR carburetor. Removal of throttle valve.
- Which racing carburetor should you choose? FCR, TMR, TMR-MJN, CRS, or others…
- FCR Carburetor Tuning - Slightly rich or too rich. It's best to keep it at a slightly rich level.
- Is it easy for beginners to tune an FCR carburetor?
- Motorcycle Intake Systems - Which is Better, Fuel Injection or Carburetor? What are the Differences?
- I want to synchronize the FCR carburetor myself after installing it.
- FCR tuning - It is easier to make a judgment if you do the final check by test riding with two motorcycles.
- Long-term storage of the FCR carburetor - Drain the gasoline from the drain bolt.
- FCR Tuning - For street use, be sure to check the throttle response at the initial opening.
- FCR Tuning - Easily Adjusting for Each Season
- Will fuel efficiency improve if I switch from a normal carburetor to an FCR carburetor?
- FCR Tuning - Please check if the pilot screw is working correctly
- FCR Tuning - The air screw is set to one turn back as a baseline. How much should it be adjusted?
- FCR settings - The symptoms of being too rich while riding are easy to recognize if you pay attention.
- FCR - Once you have installed Quick turn throttle, change the tuning accordingly
- FCR Tuning - Symptoms of too rich and too lean - Air-fuel ratio meter also recommended
- 4 points to note about gasoline leaks during FCR tuning
- Improving Fuel Efficiency with FCR Carburetors
- FCR - Tuning with easy-access jets in mind
- FCR Tuning - Will tuning improve the return to idle?
- If I use an FCR-Foam Air Filter Sock, will it be okay to use it in the rain?
- I found a box for a CBX1000 FCR from over 20 years ago in the back of my room.
- FCR Tuning - What is the air-fuel ratio at idle?
- FCR Tuning - Tuning that becomes worse due to jet changes is within the acceptable range of effects.
- FCR tuning - If you make the jet needle straight diameter lean, it may be pointless to make the jet rich…
- I got the spark plug wet! If you use the accelerator pump too much, you will get into big trouble.
- FCR Tuning - Jet Search Order from Initial Tuning
- FCR Tuning - Synchronizing six FCRs is the best part of tuning
- FCR Tuning - The pilot screw can be fully closed to allow idling.
- FCR Tuning - Air Screw Optimization
- The difficulty of tuning an FCR carburetor varies depending on whether you're using a quick throttle or a standard throttle.
- The surprising moment when I tried tuning my own FCR - for beginners - Failures 3/3
- The surprising moment when I tried tuning my own FCR - for beginners - Failures 2/3
- The surprising moment when I tried tuning my own FCR - for beginners - Failures 1/3
- The surprising moment when I tuned my FCR by myself - for beginners - Good things
- FCR Tuning - Full throttle! Check the main jet for each gear
- FCR Tuning - Tuning becomes easier if you install an air-fuel ratio meter.
- FCR Tuning - Look at the air-fuel ratio during acceleration, not partial
- FCR Tuning - The tuning of the BITO is excellent when shipped!
- FCR Tuning - Where should I tune the main jet at full throttle?
- Selecting a jet needle for the CBX1000 FCR model - I want to choose something other than the 90FXM
- FCR Tuning - How to Adjust the AS Air Screw and PS Pilot Screw
- Does the CBX1000 require an FCR accelerator pump?
- FCR Tuning - Throttle opening 1/16 determined by straight diameter and slow jet
- FCR lifespan. It was fine even after 20 years of use.
- FCR tuning - I bought an acceleration pump diaphragm so I'll compare the sizes
- CBX1000 FCR main jet full throttle tuning
- Installing an FCR on a CBX1000 - 10 Essential Tips for Serious Tuning
- Buying a CBX1000 FCR - How to tune for the first time
- FCR Tuning - Jet needle changed to 90FTN. I was concerned about the straight diameter - 2022-11-15
- FCR - The fuel line should be angled so that fuel can flow easily.
- FCR Tuning - Adjust the air screw with a digital tachometer - 2022-11-10
- Notes on changing FCR slow jet
- FCR tuning - Jet needle replacement - Up change - 2022-11-08
- FCR Tuning - Tuning throttle opening from 1/16 to 1/8 - 2022-11-06
- FCR Tuning - The number of clip stages of the jet needle is determined by the driving feeling
- FCR tuning - Carburetor synchronization work - 2022-11-02
- FCR Tuning - Slow Jet Selection - Start with the pilot screw back at about 1.0 turn
- FCR Tuning - Cold Startability - Air Screw and Pilot Screw Adjustment - 2022-11-01
- Changed the FCR acceleration pump diaphragm. Visual inspection is important. Changes in total discharge volume are difficult to understand
- FCR Tuning - Apply filter oil to the Foam Air Filter Sock at the end
- FCR Tuning - Adjust and synchronize air screw and pilot screw - 2022-10-27
- FCR Tuning - Test run and screw adjustment - 2022-10-25
- Tools required for CBX1000 FCR tuning
- FCR Tuning - Slow Jet Change - 2022-10-24
- FCR carburetor tuning - test run on the expressway and Kizuna Stadium in Iwakuni
- FCR tuning - You can tell whether the accelerator pump is rich or lean with the air-fuel ratio meter.
- CBX1000 photo and FCR acceleration pump discharge timing tuning
- FCR tuning - jet needle clip stage number change - 2022-10-16
- FCR Tuning - Acceleration Pump Discharge Timing Adjustment - 2022-10-12
- FCR Tuning - Trial run of pilot screw Slightly rich
- FCR Tuning - Change slow jet from 40 to 42 - 2022-10-08
- FCR Tuning - An Easy Way to Turn Off the Accelerator Pump
- FCR-PS Isn't it too rich? How to decide between pilot screw and slow jet
- FCR tuning - Acceleration pump adjustment - If it is too fast, it will hit the throttle valve.
- FCR Tuning - Synchronization - 2022-10-03
- FCR Tuning - Test run after changing MJ main jet
- FCR Tuning - Adjusting the Air Screw After Carburetor Synchronization - 2022-10-01
- I will write various things about the Velocity Stack of city riding-FCR. Talk about vertical orientation and processing, etc.
- Adjust the balance of the multi-vacuum gauge
- FCR Tuning - Test Run - Adjust AS - 2022-09-29
- FCR Tuning - Changed SJ from 38 to 40. PS pilot screw adjustment - 2022-09-28
- Since I changed the FCR - SJ, I checked the startability and touched the PS - 2022-09-28
- FCR tuning - Change and synchronize SJ and MJ - 2022-09-27
- FCR - Test run on the expressway - Check the condition of the main jet
- Do not set FCR - strictly prohibited before touring.
- FCR tuning - Considering the seasons of summer and winter when touching AS and PS - 2022-09-17
- Do you have the parts list, service manual, electrical diagram, and FCR tuning manual?
- FCR6 synchronization and fuel subtank
- Three advantages of converting CBX1000 to FCR
- About taper angle and FCR tuning - MJ confirmation from test run - How much does MJ influence? 2022-08-20
- About FCR-PS. Idle port, slow port and air-fuel ratio at idling
- What is the appeal of motorcycle carburetor specifications?
- FCR tuning - SJ and MJ change - 2022-08-15
- Should I change the taper angle and cut-up of FCR? Check the number of clip stages first.
- FCR tuning - AS air screw adjustment - 2022-08-03
- FCR tuning - screw adjustment and AS Uotani SP2 dial tuning - 2022-07-29
- FCR tuning - AS and PS adjustment during test run - 2022-07-28
- FCR - JN clip stage number change - 2nd time today - 2022-07-27
- FCR - Test run - Mesh jacket is pretty good - 2022-07-27
- FCR tuning - PS pilot screw changes - 2022-07-25
- Comparison of idle port and slow port of FCR carburetor
- In the case of a racing carburetor such as FCR, can it be run in the rain with a Velocity Stack specification? Should I do it?
- FCR tuning - Use BITO's default jet needle. I did a test drive with a higher cut-off.
- Comparison of FCR-jet needle cut-up. Let's take a look at the thickness of the small standard 90FXM and 90FTM.
- tuning of FCR - If the small jet needle is F taper, you cannot choose the cut-up. Round up comparison
- CBX1000 FCR tuning jet needle replacement. Impressions from a test run after changing the taper angle
- [FCR] Jet needles should be purchased from BITO.
- Initial tunings of CBX1000 FCR33 shipped by BITO. CBX1000 bikers will be happy after reading this.
- I go to vote and then ride a motorcycle. Test run-FCR tuning - 2022-07-10
- FCR tunings - all changes - 2022-07-09
- Test run - Throttle opening 1/2 - MJ change - 2022-07-08
- FCR - tuning - MJ and JN influence - 2022-07-08
- FCR tuning-Change Accelerator Pump diaphragm and test run
- FCR tuning - Acceleration pump adjustment - 2022-07-06
- Is a Quick throttle necessary for FCR?
- FCR tuning - Lean slow jet - Changed from 48 to 40 - 2022-07-03
- FCR-tuning - With Boko - 2022-07-02
- FCR tuning - AS Adjustment - 2022-06-25
- Verifying the impact of CBX1000 PS
- pilot screw adjusting tool processing
- FCR-Synchronous screw nut limits and SEP bearing guide
- FCR Carburetor - The effects of the balance pipe
- FCR tuning - MJ main jet change - 2022-06-23
- FCR tuning - MJ or JN - 2022-06-20
- FCR tuning - Drain bolt O-ring replacement
- FCR Tuning - Changed from MJ(Main jet) 125 to 120 - 2022-06-18
- FCR-MJ main jet purchase 36 pieces
- FCR - Synchronization - Taper Gauge
- FCR - SJ count tuning - tuning parts list available
- FCR - tunings when installing Foam Air Filter Sock
- FCR-tuning luggage minimum
- FCR - tuning - AS Uotani SP2 ignition timing [1] - 2022-06-12
- FCR-tunings Sheet-Google Sheets Spreadsheet
- FCR - tuning - 2022-06-10
- AS Uotani SP2-Dial tunings
- FCR - Test run with acceleration pump adjustment - 2022-06-09
- FCR-6-synchronization-balanced pipe
- FCR - Adjust the diaphragm of the accelerator pump
- Made by Kitako - Quick fuel joint for fuel line
- Test run with FCR - MJ throttle fully open - 2022-06-04
- FCR-How to fix overflow
- FCR-Fuel Level Adjustment
- FCR tuning - Jet Needle - 2022-06-02
- FCR fuel filter
- FCR Tuning - Slow jet changed from 48 to 55 - 2022-05-23
- Heading to Hattendo Village in Mihara City, Hiroshima Prefecture for a test run of the FCR.
- Jet needle clip change - 2022-05-18
- Scope of influence of FCR's MJ main jet
- PINGEL cock flow comparison PINGEL1/4
- Brembo - Corsa Corta installed
- Test run after installing HONDA CBX400F cowl - air screw adjustment
- FCR - tuning JN - 2022-04-23 - Video available
- FCR - tuning JN - 2022-04-22
- FCR Carburetor - Throttle Valve Seal Replacement
- PLX-DM6-Air fuel ratio meter-A/F meter installation
- Added Pingelcock - read properly and you'll be happy.
- FCR test run, Yasuno Station
- FCR-SJ Slow Jet – FCR Carburetor Installation
- FCR-Changed SJ slow jet. 2022-04-15
- FCR-Install SEP bearing guide on CBX1000!
- Install Quick throttle-Active Type3
- FCR Tuning - Lean main jet - Changed from 122 to 118 - 2022-04-11
- FCR tunings - Acceleration and Power Air Fuel Ratio. Bring 12.5 to 13.0 during acceleration.
- FCR synchronization and 6-series vacuum gauge
- FCR Tuning - Adjust the throttle return and turn the pilot screw
- My CBX1000.Normal style is the theme.
- Maintenance
- FCR Tuning - To What Extent Should Carburetor Synchronization Be Done?
- Are the standard brakes of classic motorcycles low in performance? I customized my brakes.
- With the quick turn throttle housing, you can set the throttle free play to 0mm!
- Throttle grip wiring - The FCR is a push-pull carburetor. Its direct operational feel is very appealing.
- Adjustment of Motorcycle Throttle Free Play
- How much gasoline is accumulated in the float chamber of the FCR carburetor?
- FCR Tuning - Re-synchronization after adjusting the throttle cable - 2023-08-01
- Spark Plug Replacement - The Idling of Carbureted Engines Smells Like Gasoline
- 3 Reasons Why Used FCR Carburetors Can Be Used
- FCR requires a filter for street use. Constant use of a velocity stack is not recommended.
- Carburetor synchronization is not the kind of maintenance where you can fail – the challenging part is the preparation.
- My impression of changing the CBX1000's clutch housing to the later model(SC06).
- Work at the rental pit on 2023-03-27 - Synchronization of the FCR carburetor and spark plug replacement were completed.
- Work at the rental pit on 2023-03-25 - Installing the FCR and removing the front tire
- Work at the rental pit - 2023-03-24 - Removal of FCR carburetor. Removal of throttle valve.
- I got the spark plug wet! If you use the accelerator pump too much, you will get into big trouble.
- FCR Tuning - Synchronizing six FCRs is the best part of tuning
- Buying a CBX1000 FCR - How to tune for the first time
- FCR - The fuel line should be angled so that fuel can flow easily.
- FCR Tuning - Apply filter oil to the Foam Air Filter Sock at the end
- Tools required for CBX1000 FCR tuning
- Amon 5-pole slim relay surge coil countermeasures
- Repaint - The illustration I provided when requesting the repaint.
- Adjust the balance of the multi-vacuum gauge
- FCR tuning - Change and synchronize SJ and MJ - 2022-09-27
- Do not set FCR - strictly prohibited before touring.
- Test drive the CBX1000 and head to the rental garage
- FCR tuning - SJ and MJ change - 2022-08-15
- Comparison of idle port and slow port of FCR carburetor
- I remove the fuel tank and clean the motorcycle.
- FCR tuning - Lean slow jet - Changed from 48 to 40 - 2022-07-03
- Verifying the impact of CBX1000 PS
- pilot screw adjusting tool processing
- FCR-Synchronous screw nut limits and SEP bearing guide
- FCR Carburetor - The effects of the balance pipe
- FCR tuning - Drain bolt O-ring replacement
- FCR - Synchronization - Taper Gauge
- FCR - tunings when installing Foam Air Filter Sock
- FCR-tuning luggage minimum
- AS Uotani SP2-gap adjustment and iridium plug
- AS Uotani SP2-Dial tunings
- FCR-6-synchronization-balanced pipe
- FCR - Adjust the diaphragm of the accelerator pump
- Made by Kitako - Quick fuel joint for fuel line
- FCR-How to fix overflow
- FCR-Fuel Level Adjustment
- FCR tuning - Jet Needle - 2022-06-02
- FCR fuel filter
- CBX1000 line on front fender
- Equip a motorcycle with a dashcam (drive recorder).
- About engine overhaul of CBX1000
- Replace the headlight bulb with an LED and switch the headlight to a multi-reflector.
- Installing the CB1100F front-end assembly on the CBX1000
- Yoshimura Progress 2 Oil Temperature Gauge - Woodstock Mount Bracket
- PINGEL cock flow comparison PINGEL1/4
- Brembo - Corsa Corta installed
- I had the head cover chrome plated.
- Test run after installing HONDA CBX400F cowl - air screw adjustment
- CBX400F cowl-improvement edition
- CBX400F Integra cowl installation completed edition
- CBX400F Integra cowl installation ~Test run~
- Change from single horn to double horn
- Rebuilt Turn Signals - CBX1000
- CBX400F Integra cowl installation troubles
- CBX400F Integra cowl reinstallation edition
- The ride height of the CBX1000: I want to raise it to secure a greater lean angle.
- GUN125-Transplanted the horn from the new Hilux
- Clutch plate replacement for the CBX1000.
- CBX400F Integra cowl installation edition
- Trouble installing generator rebuild
- FCR Carburetor - Throttle Valve Seal Replacement
- CBX400F Integra Cowl Installation Temporary Edition
- CBX400F Integra cowl installation creation edition
- PLX-DM6-Air fuel ratio meter-A/F meter installation
- Rear brake handling, floating brake, etc.
- Added Pingelcock - read properly and you'll be happy.
- Creating a turn signal position lamp on/off for a Honda motorcycle
- FCR-SJ Slow Jet – FCR Carburetor Installation
- FCR-Changed SJ slow jet. 2022-04-15
- FCR-Install SEP bearing guide on CBX1000!
- Brembo CNC brake caliper installation
- Replace the exterior with a repainted one
- Install Quick throttle-Active Type3
- table comstar wheel Polished manual work
- A Story About a Vehicle Inspection: Speedometer Failed Four Times
- FCR Tuning - Lean main jet - Changed from 122 to 118 - 2022-04-11
- Yoshimura Progress 2 Oil Temperature Gauge - Measures outside temperature.
- FCR tunings - Acceleration and Power Air Fuel Ratio. Bring 12.5 to 13.0 during acceleration.
- FCR synchronization and 6-series vacuum gauge
- FCR Tuning - Adjust the throttle return and turn the pilot screw
- Manual
- The throttle opening and throttle valve opening of the FCR carburetor are not directly proportional.
- I found a box for a CBX1000 FCR from over 20 years ago in the back of my room.
- Buying a CBX1000 FCR - How to tune for the first time
- Tools required for CBX1000 FCR tuning
- FCR Tuning - An Easy Way to Turn Off the Accelerator Pump
- Amon 5-pole slim relay surge coil countermeasures
- FCR-PS Isn't it too rich? How to decide between pilot screw and slow jet
- FCR tuning - Acceleration pump adjustment - If it is too fast, it will hit the throttle valve.
- I will write various things about the Velocity Stack of city riding-FCR. Talk about vertical orientation and processing, etc.
- Do you have the parts list, service manual, electrical diagram, and FCR tuning manual?
- About taper angle and FCR tuning - MJ confirmation from test run - How much does MJ influence? 2022-08-20
- Comparison of idle port and slow port of FCR carburetor
- Comparison of FCR-jet needle cut-up. Let's take a look at the thickness of the small standard 90FXM and 90FTM.
- tuning of FCR - If the small jet needle is F taper, you cannot choose the cut-up. Round up comparison
- [FCR] Jet needles should be purchased from BITO.
- Initial tunings of CBX1000 FCR33 shipped by BITO. CBX1000 bikers will be happy after reading this.
- FCR tuning - Acceleration pump adjustment - 2022-07-06
- Verifying the impact of CBX1000 PS
- FCR - SJ count tuning - tuning parts list available
- AS Uotani SP2-Dial tunings
- touring
- I went to the 2023 - 11th BITO JB-POWER Meeting.
- FCR carburetor tuning - test run on the expressway and Kizuna Stadium in Iwakuni
- FCR - Test run on the expressway - Check the condition of the main jet
- FCR tuning - AS air screw adjustment - 2022-08-03
- Old folk house cafe Matsubaya in Masuda City, Shimane Prefecture
- Heading to Hattendo Village in Mihara City, Hiroshima Prefecture for a test run of the FCR.
- Photo of a CBX1000 - taken at Bayside Beach, Hiroshima Prefecture, on 2021-01-10.
- Hiroshima Prefecture - Roadside Station Spa Rakan - CB-F Mini Meeting
- Touring Spot - Hiroshima Motorcycle Shrine
- Okayama International Circuit - Power Ride - 2020-09-20
- Night view spot in Hiroshima - Otake City - NIHON SEISHI Factory
- HONDA CBX1000 Photos 2022-April
- FCR test run, Yasuno Station
- SYARINMURA2022 - 2022-04-10
- A classic from Hiroshima City, Hiroshima Prefecture. Touring to Mt. Sanbe, Shimane Prefecture. Nima-cho Touring, Ota City, Shimane Prefecture
- CBX1000 Night Ride - Photo Gallery of Headlights and Lamps
- Links
- Privacy Policy
- Sitemap
Sitemap
This article can be read in about 0 minutes.