List of tags related to LED installation. The lamp size in the meter is BA9S. The front blinker is a double ball.
Maintenance Amon 5-pole slim relay surge coil countermeasures...
My CBX1000 uses Amon's 4-pole relay and 5-pole relay for the added wiring part. It will be referred to as a relay below. The other day when I was browsing the internet,I found that the current flows backwards after the coil is disconnected. I did not know. The relay is used to turn on and off the position lamp.
カテゴリ
CBX1000 Beautiful photos - at the motorcycle exhibition hall...
I’m taking photos at the storage location for my CBX1000. These pictures are taken at the display area of the rental garage. The lighting from the fluorescent lamps and direct sunlight seems to be ideal, as the polished and chrome parts, as well as the gloss black painted parts, reflect beautifully. This creates a feel of the bike being newer than it actually is, which is very gratifying.
カテゴリ
Maintenance Replace the headlight bulb with an LED and switch the headlight to a multi-reflector....
I have installed an LED headlight and a multi-reflector on my CBX1000. Currently, in Japan, yellow lights and headlight on/off switches are prohibited. When choosing LED lights and multi-reflectors, please ensure they are compliant with vehicle inspection standards. The issue is not the brightness, but rather the upper limit of the light beam's alignment, or the cut-off line.
カテゴリ
CBX1000 Photo of a CBX1000 - taken at Bayside Beach, Hiroshima Prefecture, on 2021-01-10....
I took some photos of my CBX1000 right after it was renewed. In these photos, the brake system has been upgraded from the standard setup to Brembo parts. The front forks have been re-chromed, and the springs replaced with Hyperpro ones. The bike’s current specs differ a bit from what you see here. This time, I'm just sharing the photos.
カテゴリ
CBX1000 Rebuilt Turn Signals - CBX1000...
I purchased rebuilt turn signals for my CBX1000. They are new, but I sent them out for painting right away. The CBX1000 has large, round turn signals, while the SC06 and CB series have square ones. The CBX1000 is a beautifully designed motorcycle with a cohesive look. It wouldn’t be a bad idea to attach square turn signals from the CB-F series, given that they are from a similar generation.
カテゴリ
touring Night view spot in Hiroshima - Otake City - NIHON SEISHI Factory...
If you are coming from Hiroshima Prefecture,you can reach it by turning left just before the bridge that marks the border between Hiroshima and Yamaguchi prefectures. I don't feel particularly lost,but if you hear the sound of a motorcycle,be very careful not to collide head-on with another rider.
カテゴリ
Maintenance Creating a turn signal position lamp on/off for a Honda motorcycle...
CBX1000 turn signal position on/off tuning. By cutting Br/W coming out from 8p (8-pole coupler),on/off function can be realized. The same goes for CB900F. When installing the FCR,a thin switch is installed on the right side. I achieved this by using a 4-pole relay to interrupt the wiring.
カテゴリ
CBX1000 HONDA CBX1000 Photos 2022-April...
I write explanations and concepts about motorcycles. Basically,there are almost no parts that are not touched. The frame is a little old but has been repainted. The engine has had the paint removed and is in pristine condition. I'm installing Brembo,Ohlins,Dangani,FCR,Uotani,etc. My main tires at the moment are Continentals.
カテゴリ
CBX1000 CBX1000 Photos - At Personal Garage - Many Photos...
This is a photo gallery of Personal Garage. This is a fun garage with everything from normal to shiny road glides. Next door is a custom car shop.
カテゴリ
CBX1000 CBX1000 Night Ride - Photo Gallery of Headlights and Lamps...
All of the CBX1000's meter lights are LED. The size is about BA9S Sphere Light and Raybrik. This post is mainly about photos,but it's really fun to look at bikes at night.
カテゴリ