Describe instructions, manuals, and specific methods and procedures. Examples include how to pair the SENA 10C PRO intercom and initialize the camera. The numbers on the dial of AS Uotani SP2 are also listed. Also describes the increased vehicle height of the Hilux.
![](https://img.cbx-lalala.com/wp-content/uploads/2023/01/AFCB50D6-D9D4-4061-B4F9-055818D9FCD3-scaled-e1701522308982-320x168.jpeg)
I found a box for a CBX1000 FCR from over 20 years ago in the back of my room....
This is the box that my CBX1000 FCR came in. It's not uncommon to find parts from decades ago. It's a little unusual to find just the box. The contents are still in good working order. Judging from the packaging of the box, is it the same as the CRS carburetor? The illustration shows the CRS carburetor, not the FCR.
カテゴリ
![](https://img.cbx-lalala.com/wp-content/uploads/2022/11/392ACEC7-B57C-4361-A8BF-9C18CCB5604D-scaled-e1701519862742-320x168.jpeg)
Buying a CBX1000 FCR - How to tune for the first time...
Many people want to install a racing carburetor on the CBX1000. In Japan,the options are the BITO FCR or CRS carburetor. It seems that TMR can also be made to order,but it is not common. If I were to buy one,I would choose the FCR.
カテゴリ
![](https://img.cbx-lalala.com/wp-content/uploads/2022/10/AA83FBFC-CAFC-4273-A164-65E001568608-scaled-e1701519164387-320x168.jpeg)
Tools required for CBX1000 FCR tuning...
Racing carburetors such as FCR are not finished once they are installed; with FCR,it is just the start. FCR starts after tuning. This time I will introduce the tools used for FCR tuning of CBX1000. It will also serve as a reference for other motorcycle FCR users. The main focus is on tuning,so if you want to completely disassemble it you will need a separate tool,but this is an introduction to tools for tuning.
カテゴリ
![](https://img.cbx-lalala.com/wp-content/uploads/2022/10/6A5BFF79-6242-4785-92AD-CA6945916234-scaled-e1701518458362-320x168.jpeg)
FCR Tuning - An Easy Way to Turn Off the Accelerator Pump...
All you have to do is clip the push rod of the accelerator pump to prevent it from moving. I will also add a photo,so please check the size and position of the clip. For those using the old CBX1000 FCR,there are two carburetors.
カテゴリ
![](https://img.cbx-lalala.com/wp-content/uploads/2022/10/82F4345F-8B02-43B4-8761-139B836E7E21-scaled-e1701518390185-320x168.jpeg)
Amon 5-pole slim relay surge coil countermeasures...
My CBX1000 uses Amon's 4-pole relay and 5-pole relay for the added wiring part. It will be referred to as a relay below. The other day when I was browsing the internet,I found that the current flows backwards after the coil is disconnected. I did not know. The relay is used to turn on and off the position lamp.
カテゴリ
![](https://img.cbx-lalala.com/wp-content/uploads/2022/10/EDEA63FE-F793-4D22-B103-0F8FA8004933-scaled-e1701518335187-320x168.jpeg)
FCR-PS Isn't it too rich? How to decide between pilot screw and slow jet...
I've been worried about something ever since I started using FCR. This is how to return the pilot screw. The other day,when I was synchronizing,I noticed something,so I'll write it down. There are few people who specifically write about how to decide on slow jets and pilot screws.
カテゴリ
![](https://img.cbx-lalala.com/wp-content/uploads/2022/07/6B4BAC4B-DDF8-46F0-805A-A9F99D364003-scaled-e1701514163585-320x168.jpeg)
FCR tuning - Acceleration pump adjustment - If it is too fast,it will hit the throttle valve....
Write down what will hit you first. I found a case the other day,where the fuel injection from the FCR's accelerator pump hit the throttle valve. The fuel is not being sucked into the engine,but is instead hitting a door called the throttle valve.
カテゴリ
![](https://img.cbx-lalala.com/wp-content/uploads/2022/10/24253799-8BE7-40EF-9E1A-7BE7AB3C3BA1-scaled-e1701518110747-320x168.jpeg)
I will write various things about the Velocity Stack of city riding-FCR. Talk about vertical orientation and processing,etc....
I am writing from the perspective of a city rider. If you are racing oriented,run without a filter. There are many riders who like FCR who modify the FCR Velocity Stack a little. I won't write about Velocity Stacks in detail,but I will write about them roughly based on what I know. I think this blog post will be useful for those who have just made their FCR debut.
カテゴリ
![](https://img.cbx-lalala.com/wp-content/uploads/2022/09/B37F2F5A-45FD-4138-A323-C968D88FEDE3-scaled-e1701516825857-320x168.jpeg)
Do you have the parts list,service manual,electrical diagram,and FCR tuning manual?...
I have written a case where I lent the CBX1000 parts list to an acquaintance. At that time,I also lent them the service manual,power distribution diagram,and FCR tuning manual. I wouldn't say it's essential when doing DIY,but it doesn't hurt to have it on hand and read it carefully for knowledge.
カテゴリ
![](https://img.cbx-lalala.com/wp-content/uploads/2022/08/78C5E6F8-A652-436A-A07B-949635F9C0F1-scaled-e1701515770927-320x168.jpeg)
About taper angle and FCR tuning - MJ confirmation from test run - How much does MJ influence? 2022-08-20...
Since today is Saturday,I wanted to ride on the CBX1000,but unfortunately it was about to rain. To shake or not to rain? Anything else? It was a subtle sky pattern. I ended up doing a test drive around my house while checking the weather forecast on my smartphone. So,I will be doing a test run mainly to see how the MJ looks after changing the tuning from last time.
カテゴリ