Maintenance

CBX400F Integra Cowl Installation Temporary Edition...

Posted the process of temporarily attaching the cowl to the early CBX1000 model CB1 using the stay of the CBX1000 late model - model SC06. CBX1000 early model - Attach a stay to the body of my CBX1000 model CB1.

2022-04-22

カテゴリ

タグ

CBX400F Integra cowl installation creation edition...

The cowl line of the CBX400F Integra is a little reminiscent of KAWASAKI's Z1R. Before I give it to the paint shop,I draw out a very detailed drawing and tell them how it should look like.

2022-04-21

カテゴリ

タグ

PLX-DM6-Air fuel ratio meter-A/F meter installation...

I think Autogauge,PLX,and Innovate are the options for air-fuel ratio meters. I used Autogauge and PLX. In terms of visibility,the auto gauge is completely invisible during bright daytime hours. PLX has faster startup speed.

2022-04-21

カテゴリ

タグ

Rear brake handling,floating brake,etc....

I am installing a Metal Gear Works kit and a Sunstar 240mm disc. CB version can also be used for CBX1000. We have made various changes such as reducing the diameter of the rear brake,changing from floating mount to rigid mount,and installing Brembo calipers. I'm posting this because I want people to see how the rear brake hose is routed,but I think I'm going off track.

2022-04-21

カテゴリ

タグ

Added Pingelcock - read properly and you'll be happy....

Addition of pingelcock - read properly and you will be happy. 1/4 of a Pingel is 13.5mm. Please select a 1/4 size Pingel cock to use on the CBX1000 without modification. Since it is a forced opening/closing type with a normal cock,there is no need to force replacement. However,it's cool.

2022-04-20

カテゴリ

タグ

Creating a turn signal position lamp on/off for a Honda motorcycle...

CBX1000 turn signal position on/off tuning. By cutting Br/W coming out from 8p (8-pole coupler),on/off function can be realized. The same goes for CB900F. When installing the FCR,a thin switch is installed on the right side. I achieved this by using a 4-pole relay to interrupt the wiring.

2022-04-19

カテゴリ

タグ

FCR-SJ Slow Jet – FCR Carburetor Installation...

I will mainly post photos of the FCR being removed and installed. I adjusted the throttle wire, accelerator pump, and idle stop screw.

2022-04-17

カテゴリ

タグ

FCR-Changed SJ slow jet. 2022-04-15...

Even if I turn only one CBX1000 FCR pilot screw,there is no change in idle. Is it way out of range? Is it a characteristic that we don't notice even though it is changing? I'm not really sure.

2022-04-15

カテゴリ

タグ

FCR-Install SEP bearing guide on CBX1000!...

The CBX1000 FCR has been used for about 20 years. In terms of mileage,I have used it less than 10,000 km,and I use it while replacing rubber parts,packing,Vacuum release plate,etc.

2022-04-15

カテゴリ

タグ

Brembo CNC brake caliper installation...

Up front are Brembo CNC axial 2-block calipers titanium hard anodized 40mm. At the back is a Brembo CNC axial 2 block caliper with hard anodized new crab 82mm.

2022-04-14

カテゴリ

タグ