Cowl Comparison of bikini cowl and upper cowl...
定期的に走っているCB900Fと並べて写真を撮っていましたので、前回のブログに続けてカウルについてコラムとして書きます。カウルの取付に関してはビキニカウルやスクリーン、メーターバイザーなど、ボルトオンで比較的着脱が容易な物を前提に記載します。概ねヘッドライトのステーなどに取り付けるタイプです。
Cowl
Cowl カテゴリ
Cowl Do you install a cowl on your motorcycle?...
モーターサイクルにカウルを取り付けるべきかどうかをコラムとしてに書いていきます。私は先日、CBX1000にCBX400Fインテグラのカウルをオリジナルっぽくつけました。雑に結論から書くと、公道を走るモーターサイクルにはカウルは取り付けるべき！です。色々な観点で私見を書いていきます。
カテゴリ
CBX1000 Rental Garage - CBX400F Integra Cowl Specifications...
My CBX1000 uses part of the motorcycle shop as a rental garage. I haven't taken many photos since I changed to the CBX400F Integra cowl specification. I'm honored that the motorcycle shop told me there would be no problem since it will be their signature vehicle. When returning a bicycle after riding,we make sure to wash the vehicle and remove any debris from the front before parking it in the rental garage.
カテゴリ
CBX1000 CBX1000 - 2022/06/05 - Cleaning is fun....
Cleaning the CBX1000. A motorcycle looks its best when its wheels and chain are clean. Use as little water as possible when cleaning. Damp a rag to remove insects, clean off excess oil, apply a barrier coat, wax the plated parts, spray silicone on solid surfaces, and lightly polish the mirror-finished areas.
カテゴリ
CBX1000 CBX1000 line on front fender...
My CBX1000 has a repainted exterior. We also have another set with the original exterior. There are dimples and fading. It's not rusty or rotten,and I don't know if it's in good or bad condition. I ordered a separate line to be added when I repainted it and am currently doing so.
カテゴリ
Cowl Test run after installing HONDA CBX400F cowl - air screw adjustment...
It's been a while since I started working on it,so I'd like to get a feel for the FCR. The main thing is to attach the cowl,so I don't want to touch it too much because it will change what I do. I feel like my cornering is going really well.
カテゴリ
Cowl CBX400F cowl-improvement edition...
Attach the CBX400F Integra cowl to the CBX1000. We are making fine adjustments to the angle and improving the blinker installation method. If I can't reach 200km/h in this condition,there's no point in adding a cowl,so I'm trying to make sure I can accelerate with peace of mind.
カテゴリ
Cowl CBX400F Integra cowl installation completed version...
Completed installation of CBX400F Integra cowl on HONDA CBX1000. The blinker stay and Yoshimura time meter were shaking badly,so I fixed it. The turn signal can be handled by inserting rubber into the bolt joint and adding one stay. The Yoshimura Temperature Meter is swaying,so we wrapped rubber around the part that is in contact with the frame.
カテゴリ
Maintenance CBX400F Integra cowl installation ~Test run~...
The turn signal stay and the Yoshimura oil temperature gauge stay are shaking so badly that they need to be fixed. Regarding the CBX400F Integra cowl,there seems to be no problems with strange vibration or strength. There seems to be no problem with the steering angle or interference. The motorcycle with the cowl was the best. The way the wind hits is completely different from the naked state.
カテゴリ
Cowl Change from single horn to double horn...
[Single horn] has been changed to [Double horn]. CBX1000 models CB1 and SC03 are single horns. It's a single horn with a cowl attached to it that seems to be part of the design,but I didn't have a place to attach it,so I changed it to a small car horn.
カテゴリ