2022-05

Cowl

CBX400F cowl-improvement edition...

Attach the CBX400F Integra cowl to the CBX1000. We are making fine adjustments to the angle and improving the blinker installation method. If I can't reach 200km/h in this condition,there's no point in adding a cowl,so I'm trying to make sure I can accelerate with peace of mind.
2022.05.10
       
カテゴリCBX1000CowlMaintenance
タグCBX1000CBX400FCustomRepaint
Cowl

CBX400F Integra cowl installation completed version...

Completed installation of CBX400F Integra cowl on HONDA CBX1000. The blinker stay and Yoshimura time meter were shaking badly,so I fixed it. The turn signal can be handled by inserting rubber into the bolt joint and adding one stay. The Yoshimura Temperature Meter is swaying,so we wrapped rubber around the part that is in contact with the frame.
2022.05.04
       
カテゴリCBX1000CowlMaintenance
タグCBX1000CBX400FCustom
Maintenance

CBX400F Integra cowl installation ~Test run~...

The turn signal stay and the Yoshimura oil temperature gauge stay are shaking so badly that they need to be fixed. Regarding the CBX400F Integra cowl,there seems to be no problems with strange vibration or strength. There seems to be no problem with the steering angle or interference. The motorcycle with the cowl was the best. The way the wind hits is completely different from the naked state.
2022.05.03
       
カテゴリCBX1000CowlMaintenance
タグCBX1000CBX400F
Cowl

Change from single horn to double horn...

[Single horn] has been changed to [Double horn]. CBX1000 models CB1 and SC03 are single horns. It's a single horn with a cowl attached to it that seems to be part of the design,but I didn't have a place to attach it,so I changed it to a small car horn.
2022.05.02
       
カテゴリCBX1000CowlMaintenance
タグCBX1000CBX400FCustomHiluxYouTube