April 2022 | Page 2 | CBX-LALALA HONDA Mortorcycle CBX1000 FCR Carburetor

PLX-DM6-Air fuel ratio meter-A/F meter installation...

I think Autogauge,PLX,and Innovate are the options for air-fuel ratio meters. I used Autogauge and PLX. In terms of visibility,the auto gauge is completely invisible during bright daytime hours. PLX has faster startup speed.

2022.04.21

カテゴリ

タグ

Rear brake handling,floating brake,etc....

I am installing a Metal Gear Works kit and a Sunstar 240mm disc. CB version can also be used for CBX1000. We have made various changes such as reducing the diameter of the rear brake,changing from floating mount to rigid mount,and installing Brembo calipers. I'm posting this because I want people to see how the rear brake hose is routed,but I think I'm going off track.

2022.04.21

カテゴリ

タグ

Okayama International Circuit - Power Ride - 2020-09-20...

To Okayama International Circuit. If you like motorcycles,you must try [circuit riding]! Isn't there a lot of people who think that? There are many other options,such as [going to Hokkaido],[user vehicle inspection],[tramping],[going around Shikoku],[traversing Japan],and [wanting to do a wheelie]. [Circuit driving] is one of the top items.

2022.04.20

カテゴリ

タグ

Night view spot in Hiroshima - Otake City - NIHON SEISHI Factory...

If you are coming from Hiroshima Prefecture,you can reach it by turning left just before the bridge that marks the border between Hiroshima and Yamaguchi prefectures. I don't feel particularly lost,but if you hear the sound of a motorcycle,be very careful not to collide head-on with another rider.

2022.04.20

カテゴリ

タグ

Added Pingelcock - read properly and you'll be happy....

Addition of pingelcock - read properly and you will be happy. 1/4 of a Pingel is 13.5mm. Please select a 1/4 size Pingel cock to use on the CBX1000 without modification. Since it is a forced opening/closing type with a normal cock,there is no need to force replacement. However,it's cool.

2022.04.20

カテゴリ

タグ

Creating a turn signal position lamp on/off for a Honda motorcycle...

CBX1000 turn signal position on/off tuning. By cutting Br/W coming out from 8p (8-pole coupler),on/off function can be realized. The same goes for CB900F. When installing the FCR,a thin switch is installed on the right side. I achieved this by using a 4-pole relay to interrupt the wiring.

2022.04.19

カテゴリ

タグ

HONDA CBX1000 Photos 2022-April...

I write explanations and concepts about motorcycles. Basically,there are almost no parts that are not touched. The frame is a little old but has been repainted. The engine has had the paint removed and is in pristine condition. I'm installing Brembo,Ohlins,Dangani,FCR,Uotani,etc. My main tires at the moment are Continentals.

2022.04.18

カテゴリ

タグ

FCR test run,Yasuno Station...

Let's go for a test run after tuning up the FCR! Yasuno Station in northern Hiroshima Prefecture is becoming a secret touring spot,and the number of people is increasing every year. There were a lot of people on bicycles,and I saw people with Shimane license plates here and there. I rarely use it when I want to go for a long test run.

2022.04.18

カテゴリ

タグ

FCR-SJ Slow Jet – FCR Carburetor Installation...

I will mainly post photos of the FCR being removed and installed. I adjusted the throttle wire, accelerator pump, and idle stop screw.

2022.04.17

カテゴリ

タグ

FCR-Changed SJ slow jet. 2022-04-15...

Even if I turn only one CBX1000 FCR pilot screw,there is no change in idle. Is it way out of range? Is it a characteristic that we don't notice even though it is changing? I'm not really sure.

2022.04.15

カテゴリ

タグ