2022-04

Cowl

CBX400F Integra cowl installation troubles...

Motorcycles with upper cowl or bikini cowl have no gaps. Also, some older models such as the GPZ900R have a gap of about 10cm between the meter and the cowl. There is also a gap in the later model of CBX. Ducati's bevel etc. have large gaps. It may be an intentional gap.
       
カテゴリCBXCowlMaintenance
タグCBXCBX400F
Cowl

CBX400F Integra cowl reinstallation edition...

When I attached it to the CBX fully open, the offset was too large and there was a gap between the CBX meter and the CBX400F cowl. I was referring to the mounting position of rocket cowls such as Ducati's bevel. This is based on Kawasaki's Z1R turn signal installation position and cowl line. The fixing position of the cowl is based on Vedkati's bell.
       
カテゴリCBXCowlMaintenance
タグCBXCBX400F
Biker&Others

GUN125-Transplanted the horn from the new Hilux...

The CBX horn is quite large and heavy, probably because it is part of the design. Since it has been made into a cowl, we will replace the horn with something lighter and smaller. The horn of the Hilux has been changed. I transplanted the normal horn from the Hilux that I had removed.
       
カテゴリBiker&OthersCBXCowlMaintenance
タグCBXCBX400FHilux
Cowl

CBX400F Integra cowl installation edition...

If you have the stay of the later model of CBX, SC06, you can install the frame mount cowl fairly easily. Easy to install means easy to remove.
       
カテゴリCBXCowlMaintenance
タグCBXCBX400F
FCR

FCR-tuning JN-2022/04/23-Video available...

Continuing from the other day, I will touch on JN. If it goes out of control in the same season and in the same place, I think it's better to think that something is broken in the first place. I work with the mindset that if something goes wrong, I can just get things back to normal.
       
カテゴリCBXFCR
タグCBXFCRFCR-BeginnersJNYouTube
FCR

FCR-tuning JN-2022/04/22

Regarding the FCR turning, the JN-Jet Needle's clip seems to change the way it blows up. The position of the clip is lean at the top and rich at the bottom. It's better to choose based on feel, without worrying about the air/fuel ratio.
       
カテゴリCBXFCR
タグCBXFCRFCR-BeginnersJNVacuumgauge
Maintenance

Trouble installing generator rebuild...

Replace the CBX regulator or generator. Even though I called it a replacement, I sent the generator to a specialized company and had it rebuilt. As shown in the video, it blows out a lot of white smoke. I realized that modifying the electrical system is an item that requires a lot of thought.
       
カテゴリCBXMaintenance
タグCBXYouTube
CBX

FCR carburetor - lip seal replacement...

Replaced FCR carburetor parts. Around the lip seal and accelerator pump. I'm thinking about riding CBX, so I try to avoid long-term immobility. Many work methods include removing the cab, modifying it at home, and installing it as an Assy. Working in a rental pit.
       
カテゴリCBXFCRMaintenance
タグCBXFCRFCR-BeginnersYouTube
Cowl

CBX400F Integra Cowl Installation Temporary Edition...

Posted the process of temporarily attaching the cowl to the early CBX model CB1 using the stay of the CBX late model - model SC06. CBX early model - Attach a stay to the body of my CBX model CB1.
       
カテゴリCBXCowlMaintenance
タグCBXCBX400F
Cowl

CBX400F Integra cowl installation creation edition...

The cowl line of the CBX400F Integra is a little reminiscent of KAWASAKI's Z1R. Before I give it to the paint shop, I draw out a very detailed drawing and tell them how it should look like.
       
カテゴリCBXCowlMaintenance
タグCBXCBX400F