I am writing articles related to CBX1000. The basics are the same whether it's a 6 cylinder or a 4 cylinder! Should be. . .

CBX1000

Rebuilt Turn Signals - CBX1000...

I purchased rebuilt turn signals for my CBX1000. They are new, but I sent them out for painting right away. The CBX1000 has large, round turn signals, while the SC06 and CB series have square ones. The CBX1000 is a beautifully designed motorcycle with a cohesive look. It wouldn’t be a bad idea to attach square turn signals from the CB-F series, given that they are from a similar generation.
       
カテゴリCBX1000Maintenance
タグCBX1000ECLED
Cowl

CBX400F Integra cowl installation troubles...

Motorcycles with upper cowl or bikini cowl have no gaps. Also,some older models such as the GPZ900R have a gap of about 10cm between the meter and the cowl. There is also a gap in the later model of CBX1000. Ducati's bevel etc. have large gaps. It may be an intentional gap.
       
カテゴリCBX1000CowlMaintenance
タグCBX1000CBX400F
Cowl

CBX400F Integra cowl reinstallation edition...

When I attached it to the CBX1000 fully open,the offset was too large and there was a gap between the CBX1000 meter and the CBX400F cowl. I was referring to the mounting position of rocket cowls such as Ducati's bevel. This is based on Kawasaki's Z1R turn signal installation position and cowl line. The fixing position of the cowl is based on Vedkati's bell.
       
カテゴリCBX1000CowlMaintenance
タグCBX1000CBX400F
CBX1000

The ride height of the CBX1000: I want to raise it to secure a greater lean angle....

I’ve raised the ride height of my CBX1000 as much as possible. The reason is that I want to ride a bigger motorcycle and to achieve a greater lean angle. However, that’s not my top priority. Smaller motorcycles are easier to control with body weight. I’ll include some photos to give you an idea of my leg length. Recently, I've noticed that women have been riding racer replica-style 250cc motorcycles, which highlights the remarkable popularity of motorcycles in Japan since around 2018.
       
カテゴリBiker&OthersCBX1000Maintenance
タグCBX1000Ohlins
Biker&Others

GUN125-Transplanted the horn from the new Hilux...

The CBX1000 horn is quite large and heavy,probably because it is part of the design. Since it has been made into a cowl,we will replace the horn with something lighter and smaller. The horn of the Hilux has been changed. I transplanted the normal horn from the Hilux that I had removed.
       
カテゴリBiker&OthersCBX1000CowlMaintenance
タグCBX1000CBX400FHilux
Maintenance

Clutch plate replacement for the CBX1000....

The size of the collar for the earlier model is 45mm, while the size for the later model is 43.6mm. The springs have slight differences between the early and late models. It should be possible to force the earlier model's parts to work with the later model. The clutch outer differs in shape for the CB1, SC03, and SC06 models. The newer the model, the more improvements have been made. It seems that specialized shops can rebuild or implement improvements for the CB1 and SC03.The friction plates consist of seven disc A's and one disc B. Disc B is larger and is currently out of stock from the manufacturer.
       
カテゴリCBX1000Maintenance
タグCBX1000Clutch
Biker&Others

Leather Jacket - Vanson - One Star...

Since I was young, I’ve dreamed of riding a Kawasaki motorcycle while wearing a Simpson helmet and a Vanson One Star jacket. As the internet became more prevalent, there was a time when many One Star leather jackets were being traded on auctions. When I finally had some extra money, I bought one secondhand.
       
カテゴリBiker&OthersCBX1000
タグCBX1000vanson
Biker&Others

Helmet Sales in Japan - SIMPSON - Blue Star...

The SIMPSON-RX10-BLUE STAR is a helmet released as a limited edition by the Japanese distributor NORIX. It features an American star design but is an original creation for Japan. Other models in the lineup include the Red Star, Silver Star, and Gold Star. When I purchased mine at a retail store, the stock was piling up. However, they sold out at a fast pace. Even though it was marketed as a limited edition, it seems that a reissue version was also sold. Nonetheless, in 2022, new ones are being traded at approximately 1.5 times the original price in auctions.
       
カテゴリBiker&OthersCBX1000
タグCBX1000SIMPSON
Cowl

CBX400F Integra cowl installation edition...

If you have the stay of the later model of CBX1000,SC06,you can install the frame mount cowl fairly easily. Easy to install means easy to remove.
       
カテゴリCBX1000CowlMaintenance
タグCBX1000CBX400F
FCR

FCR-tuning JN - 2022-04-23 - Video available...

Continuing from the other day,I will touch on JN. If it goes out of control in the same season and in the same place,I think it's better to think that something is broken in the first place. I work with the mindset that if something goes wrong,I can just get things back to normal.
       
カテゴリCBX1000FCR
タグCBX1000FCRFCR-BeginnersJNYouTube