FCR

FCR

FCR-tuning JN - 2022-04-23 - Video available...

Continuing from the other day,I will touch on JN. If it goes out of control in the same season and in the same place,I think it's better to think that something is broken in the first place. I work with the mindset that if something goes wrong,I can just get things back to normal.
2022.04.24
       
カテゴリCBX1000FCR
タグCBX1000FCRFCR-BeginnersJNYouTube
FCR

FCR - tuning JN - 2022-04-22...

Regarding the FCR turning,the JN-Jet Needle's clip seems to change the way it blows up. The position of the clip is lean at the top and rich at the bottom. It's better to choose based on feel,without worrying about the air/fuel ratio.
2022.04.22
       
カテゴリCBX1000FCR
タグCBX1000FCRFCR-BeginnersJNVacuumgauge
CBX1000

FCR carburetor - lip seal replacement...

Replaced FCR carburetor parts. Around the lip seal and accelerator pump. I'm thinking about riding CBX1000,so I try to avoid long-term immobility. Many work methods include removing the cab,modifying it at home,and installing it as an Assy. Working in a rental pit.
2022.04.22
       
カテゴリCBX1000FCRMaintenance
タグCBX1000FCRFCR-BeginnersYouTube
FCR

PLX-DM6-Air fuel ratio meter-A/F meter installation...

I think Autogauge,PLX,and Innovate are the options for air-fuel ratio meters. I used Autogauge and PLX. In terms of visibility,the auto gauge is completely invisible during bright daytime hours. PLX has faster startup speed.
2022.04.21
       
カテゴリCBX1000FCRMaintenance
タグCBX1000FCRFCR-Beginners
Maintenance

Added Pingelcock - read properly and you'll be happy....

Addition of pingelcock - read properly and you will be happy. 1/4 of a Pingel is 13.5mm. Please select a 1/4 size Pingel cock to use on the CBX1000 without modification. Since it is a forced opening/closing type with a normal cock,there is no need to force replacement. However,it's cool.
2022.04.20
       
カテゴリCBX1000FCRMaintenance
タグCBX1000FCRPingel
CBX1000

HONDA CBX1000 Photos 2022-April...

I write explanations and concepts about motorcycles. Basically,there are almost no parts that are not touched. The frame is a little old but has been repainted. The engine has had the paint removed and is in pristine condition. I'm installing Brembo,Ohlins,Dangani,FCR,Uotani,etc. My main tires at the moment are Continentals.
2022.04.18
       
カテゴリCBX1000touring
タグBremboCBX1000CNCComstarWheelsFCRLEDTouring
touring

FCR test run,Yasuno Station...

Let's go for a test run after tuning up the FCR! Yasuno Station in northern Hiroshima Prefecture is becoming a secret touring spot,and the number of people is increasing every year. There were a lot of people on bicycles,and I saw people with Shimane license plates here and there. I rarely use it when I want to go for a long test run.
2022.04.18
       
カテゴリCBX1000FCRtouring
タグASCBX1000FCRPSTouring
FCR

FCR-SJ Slow Jet – FCR Carburetor Installation...

I will mainly post photos of the FCR being removed and installed. I adjusted the throttle wire, accelerator pump, and idle stop screw.
2022.04.17
       
カテゴリCBX1000FCRMaintenance
タグASCBX1000FCRPSVacuumgauge
FCR

FCR-Changed SJ slow jet. 2022-04-15...

Even if I turn only one CBX1000 FCR pilot screw,there is no change in idle. Is it way out of range? Is it a characteristic that we don't notice even though it is changing? I'm not really sure.
2022.04.15
       
カテゴリCBX1000FCRMaintenance
タグASCBX1000FCRPS
FCR

FCR-Install SEP bearing guide on CBX1000!...

The CBX1000 FCR has been used for about 20 years. In terms of mileage,I have used it less than 10,000 km,and I use it while replacing rubber parts,packing,Vacuum release plate,etc.
2022.04.15
       
カテゴリCBX1000FCRMaintenance
タグCBX1000FCRYouTube
Next page