I am writing articles related to CBX1000. The basics are the same whether it's a 6 cylinder or a 4 cylinder! Should be. . .

FCR

FCR-PS Isn't it too rich? How to decide between pilot screw and slow jet...

I've been worried about something ever since I started using FCR. This is how to return the pilot screw. The other day,when I was synchronizing,I noticed something,so I'll write it down. There are few people who specifically write about how to decide on slow jets and pilot screws.
2022.10.05
       
カテゴリCBX1000FCRManual
タグCBX1000ColumnFCRFCR-BeginnersPSSJ
Biker&Others

FCR tuning - Acceleration pump adjustment - If it is too fast,it will hit the throttle valve....

Write down what will hit you first. I found a case the other day,where the fuel injection from the FCR's accelerator pump hit the throttle valve. The fuel is not being sucked into the engine,but is instead hitting a door called the throttle valve.
2022.10.05
       
カテゴリBiker&OthersCBX1000FCRManual
タグAccelerationPumpCBX1000ColumnFCR
FCR

FCR Tuning - Synchronization - 2022-10-03...

When I went touring the other day,I touched the AS air screw,PS pilot screw,and idling stop screw,so I thought that the synchronization might be loose,so I made time to do it from 17:00 to 18:00. I synchronized while being careful not to be unable to work due to sunset.
2022.10.04
       
カテゴリCBX1000FCR
タグcabtuningCBX1000ColumnFCRFCR-BeginnersVacuumgauge
Cowl

CBX400F Integra cowl installation - leftover parts for naked...

When I was cleaning up my room,I came across some parts that I haven't used recently. These are the leftover parts from CBX1000's CBX400F Integra cowl specification. Parts for naked style.
2022.10.03
       
カテゴリCBX1000Cowl
タグCBX1000CBX400FColumn
FCR

FCR Tuning - Test run after changing MJ main jet...

I drove on the expressway. Speaking of expressways,for those who regularly tune FCRs,there is only one thing to do. Check MJ main jet. Driving at full throttle. In terms of throttle opening,the range of MJ influence is from fully open to close to fully open. The CBX1000 has up to 5 gears.
2022.10.03
       
カテゴリCBX1000FCR
タグCBX1000FCRFCR-BeginnersMJ
FCR

FCR Tuning - Adjusting the Air Screw After Carburetor Synchronization - 2022-10-01...

I checked synchronization by touching it only with the throttle stop screw. I put the AS air screw back in for 5 minutes. I opened and closed the PS pilot screw for 15 minutes and checked the changes. There was a change in the startability of the engine,but as a result,I haven't made any changes since before I touched it. I did some light work on various things.
2022.10.01
       
カテゴリCBX1000FCR
タグAScabtuningCBX1000FCRFCR-Beginners
FCR

I will write various things about the Velocity Stack of city riding-FCR. Talk about vertical orientation and processing,etc....

I am writing from the perspective of a city rider. If you are racing oriented,run without a filter. There are many riders who like FCR who modify the FCR Velocity Stack a little. I won't write about Velocity Stacks in detail,but I will write about them roughly based on what I know. I think this blog post will be useful for those who have just made their FCR debut.
2022.10.01
       
カテゴリCBX1000FCRManual
タグCBX1000FCRFCR-BeginnersRamair
Cowl

Repaint-Illustration given when requesting...

I organized my Google Drive. I found an illustration for the instructions I wrote when I requested the exterior repaint of my CBX1000. I will write about it. I will hire a repaint professional to do the job. Professionals fulfill client orders while conducting interviews.
2022.09.30
       
カテゴリCBX1000CowlMaintenance
タグCBX1000ColumnCustomRepaint
FCR

Adjust the balance of the multi-vacuum gauge...

CBX1000 is a 6-cylinder multi-engine. You will need to synchronize the carburetor. The other day,I adjusted the balance of the vacuum gauge for the first time in a while. This time we'll be talking about multi-vacuum gauges for motorcycles. I don't know if it's for cars. Balance adjustment is to align the needles of each meter of the vacuum gauge uniformly. Whether or not the actual negative pressure can be measured accurately is another matter.
2022.09.29
       
カテゴリCBX1000FCRMaintenance
タグcabtuningCBX1000FCRVacuumgauge
FCR

FCR Tuning - Test Run - Adjust AS - 2022-09-29...

I did a test run on the mountain road from 5pm. I changed my SJ the other day. The AS adjustment,PS adjustment,and idling adjustment will be done the next day,so I'll check the startability when it's cold. Since the SJ is being changed from 42 to 40,the plan is to open and close AS and PS about half a turn.
2022.09.29
       
カテゴリCBX1000FCR
タグASCBX1000FCRFCR-BeginnersPS
Next page