user

CBX1000

Do you have the parts list,service manual,electrical diagram,and FCR tuning manual?...

I have written a case where I lent the CBX1000 parts list to an acquaintance. At that time,I also lent them the service manual,power distribution diagram,and FCR tuning manual. I wouldn't say it's essential when doing DIY,but it doesn't hurt to have it on hand and read it carefully for knowledge.
2022-09-08
       
カテゴリBiker&OthersCBX1000FCRManual
タグCBX1000ColumnFCR
Cowl

Naked style - CBX1000 looks cooler without a cowl...

I posted a naked style photo from a few years ago that came out. I once again felt that the design of the CBX1000 really suits the naked-style round headlights. When it comes to riding,a motorcycle with a cowl is definitely easier to ride.
2022-09-07
       
カテゴリBiker&OthersCBX1000Cowl
タグCBX1000CBX400FColumnCustom
FCR

FCR6 synchronization and fuel subtank...

I've been a bit off track lately with the idea of starting a motorcycle blog,but this is an FCR-related post. That said,it is related. As the title suggests,I would like to introduce you to the fuel sub tank. Rather than synchronization,I will write an introduction to the fuel subtank.
2022-09-03
       
カテゴリCBX1000FCR
タグCBX1000FCRFCR-BeginnersVacuumgauge
FCR

Three advantages of converting CBX1000 to FCR...

This time,I would like to introduce three benefits of converting CBX1000 to FCR,which is my favorite,by converting CBX1000 to FCR33. I will write about it in a column,but I will also introduce the disadvantages. There are no disadvantages caused by converting to FCR. Basically there are only good things.
2022-08-26
       
カテゴリCBX1000FCR
タグCBX1000ColumnFCR
CBX1000

Test drive the CBX1000 and head to the rental garage...

I didn't return it to the rental garage for a while because the rainy season ended and it was easy to drive,and I was frequently tuning the FCR. The day before I ride the CBX1000,I pull it out of the rental garage,leave it at home,and ride it the next day.
2022-08-24
       
カテゴリCBX1000CowlMaintenance
タグCBX1000CBX400FColumnCustomRepaint
FCR

About taper angle and FCR tuning - MJ confirmation from test run - How much does MJ influence? 2022-08-20...

Since today is Saturday,I wanted to ride on the CBX1000,but unfortunately it was about to rain. To shake or not to rain? Anything else? It was a subtle sky pattern. I ended up doing a test drive around my house while checking the weather forecast on my smartphone. So,I will be doing a test run mainly to see how the MJ looks after changing the tuning from last time.
2022-08-20
       
カテゴリCBX1000FCRManual
タグCBX1000ColumnFCRFCR-BeginnersJNMJ
CBX1000

About FCR-PS. Idle port,slow port and air-fuel ratio at idling...

The other day,when I was carrying around a Carburetor Pilot Screw Adjustment Tool,a certain mass touring group asked me,``What is this?'' ” I was bombarded with questions in turn. I have come to my own conclusions and done things that I had doubts about since I started tuning up FCR,so I will write about them historically.
2022-08-19
       
カテゴリCBX1000FCR
タグASCBX1000ColumnFCRFCR-BeginnersJNPSSJ
CBX1000

What is the appeal of motorcycle carburetor specifications?...

There are two types of motorcycle fuel injection systems in the world. Carburetor specifications or other than Carburetor specifications? Except for the carburetor specifications,it will be injection. Since FCR is also a carburetor specification,I will write about the good and bad points of carburetor specifications while comparing them with injection. The trick here is to write about it while comparing it to injection.
2022-08-17
       
カテゴリCBX1000FCR
タグCBX1000ColumnFCR
FCR

FCR tuning - SJ and MJ change - 2022-08-15...

With SJ45,I felt like the screw was opening too much,so I changed it to 42. I chose 42 because I wanted to make fine-tuned tuning,but 40 might be the perfect range for all year round. I feel a little regretful that it might not be necessary to make it look strangely deviate from Bito's initial tuning.
2022-08-16
       
カテゴリCBX1000FCRMaintenance
タグASAS-Uotani-SP2CBX1000FCRFCR-BeginnersJNPSsynchronization
CBX1000

Should I change the taper angle and cut-up of FCR? Check the number of clip stages first....

This time I will write in a column. The other day,I had a little conversation about the FCR tuning with the divine engineer who gave me two engines for my CBX1000 free of charge. I was told,``JN checks the number of clip stages before checking the taper angle.'' According to the master,it's natural that the clip position will change if you change the taper,so if you don't take that into account when purchasing a jet needle,it will be a waste of money.
2022-08-09
       
カテゴリCBX1000FCR
タグCBX1000FCRFCR-BeginnersJN
Next page