"jet needle"

FCR

FCR Tuning - Easily Adjusting for Each Season...

There are various owners when it comes to tuning FCR, ranging from those who want it to be perfect to those who are satisfied with around 80% accuracy. Among them, many owners prefer to adjust the FCR only within the range they can access.
2023.02.22
       
カテゴリCBX1000FCR
タグASCBX1000ColumnFCRFCR-BeginnersJNMJPS
FCR

FCR Tuning - The air screw is set to one turn back as a baseline. How much should it be adjusted?...

CBX1000のブログを書いている事がきっかけで、知らない人からエアスクリューの戻しの調整について、色々教えてくれとリアルでご質問を受けました。365回ブログを書くという事を目標としていて自分の為にブログを書いているのですが、ブログから反応があると嬉しい物です。
2023.02.14
       
カテゴリCBX1000FCR
タグASCBX1000ColumnFCRFCR-Beginners
FCR

FCR Tuning - Symptoms of too rich and too lean - Air-fuel ratio meter also recommended...

When tuning FCR, you will always see these words. [rich] [lean] They seem clear, but they are very vague. For example, there are various expressions for rich, such as [little rich] and [too rich].
2023.02.08
       
カテゴリCBX1000FCR
タグCBX1000ColumnFCRFCR-Beginners
FCR

FCR - Tuning with easy-access jets in mind...

CBX1000のFCRを触る時はつい最近までは気になったらすぐにジェットを変更するように心がけていました。私は趣味でFCRのセッティングをしています。時間効率の優先度は低いです。納得出来て満足できる結果が優先です。もちろん、手間だと感じる事もあります。
2023.01.24
       
カテゴリCBX1000FCR
タグCBX1000ColumnFCRFCR-Beginners
FCR

FCR Tuning - Tuning that becomes worse due to jet changes is within the acceptable range of effects....

What does it mean to tolerate poor performance? I will write about the tuning that makes the performance worse. FCR tuning is a repetition of AB testing. If there is no change even after adjusting the carburetor, it cannot be compared. It is possible to get a result that there was no change, but if you cannot compare, you cannot tune the FCR.
2023.01.20
       
カテゴリCBX1000FCR
タグCBX1000ColumnFCRFCR-Beginners
FCR

FCR tuning - If you make the jet needle straight diameter lean, it may be pointless to make the jet rich......

This is a description from the history of CBX1000 FCR tuning. It may not be useful, but if you intentionally unbalance the jet, you can use a jet that you can't use. In particular, the CBX1000 tends to run out of clip stages.
2023.01.18
       
カテゴリCBX1000FCR
タグCBX1000ColumnFCRFCR-BeginnersJNSJ
FCR

FCR Tuning - Jet Search Order from Initial Tuning...

I received an email asking about the FCR of a CBX1000. I'm an amateur, but I try to provide information diligently in my own way. I'm not doing this commercially, but I'm very happy when I get a reaction from the web. This time, I'll write about the order in which you should tune the FCR from the factory.
2023.01.17
       
カテゴリCBX1000FCR
タグCBX1000ColumnFCRFCR-BeginnersJNMJSJ
FCR

FCR Tuning - The pilot screw can be fully closed to allow idling....

Recently, I have been posting about tuning the FCR at low throttle opening. This time, it's about adjusting the pilot screw. There are many posts written about it depending on the time, place, and occasion. People say different things. The information provided also varies depending on the source, such as magazines and online articles.
2023.01.15
       
カテゴリCBX1000FCR
タグCBX1000FCRFCR-BeginnersPS
FCR

The difficulty of tuning an FCR carburetor varies depending on whether you're using a quick throttle or a standard throttle....

My CBX1000 used to have a very cool BITO machined throttle. I used it for almost 20 years, but I sold it because I changed it to an active Quick throttle. One of the recent themes in tuning the FCR is the feeling of acceleration when opening the throttle suddenly.
2023.01.10
       
カテゴリCBX1000FCR
タグCBX1000ColumnCustomFCRFCR-Beginners
FCR

The surprising moment when I tried tuning my own FCR - for beginners - Failures 3/3...

In the setting of the CBX1000 FCR, there is one part about what went well, but three parts about what went wrong. It is true that people often learn from their mistakes. So let's get started!
2023.01.06
       
カテゴリCBX1000FCR
タグCBX1000ColumnFCRFCR-Beginners
Next page