FCR Installing an FCR on a CBX1000 - 10 Essential Tips for Serious Tuning...
This article is aimed at people who want to start tuning up their FCR in earnest. It covers carburetor synchronization and tuning.
Column
FCR カテゴリ
FCR Notes on changing FCR slow jet...
Since the CBX1000 has 6 carburetors,the number of jet changes is 6 times that of the SR,and 1.5 times that of a 4-cylinder motorcycle. It's a pain. When purchasing a new jet,it costs 6 times more than an SR. I don't regret it too much since it's money I'll be spending on my hobby,but it's better if it doesn't cost anything.
カテゴリ
FCR FCR Tuning - Slow Jet Selection - Start with the pilot screw back at about 1.0 turn...
You should be careful when choosing a jet needle. Even if the condition is good when the throttle opening is low,the effect may appear as the throttle opening is increased. The number of CBX1000's FCR jet needles at the time of shipment is 90FXM#3. The cut-up is special.
カテゴリ
Maintenance FCR Tuning - Apply filter oil to the Foam Air Filter Sock at the end...
This is not a story limited to FCR. While setting up FCR,I often test drive with Velocity Stack specifications. The reason is that it is a hassle to attach and detach the Foam Air Filter Sock when turning the air screw. Although it is a Foam Air Filter Sock,even if it is installed and driven with oil applied,it will not affect the settings much.
カテゴリ
FCR Tools required for CBX1000 FCR tuning...
Racing carburetors such as FCR are not finished once they are installed; with FCR,it is just the start. FCR starts after tuning. This time I will introduce the tools used for FCR tuning of CBX1000. It will also serve as a reference for other motorcycle FCR users. The main focus is on tuning,so if you want to completely disassemble it you will need a separate tool,but this is an introduction to tools for tuning.
カテゴリ
FCR FCR Tuning - An Easy Way to Turn Off the Accelerator Pump...
All you have to do is clip the push rod of the accelerator pump to prevent it from moving. I will also add a photo,so please check the size and position of the clip. For those using the old CBX1000 FCR,there are two carburetors.
カテゴリ
FCR FCR-PS Isn't it too rich? How to decide between pilot screw and slow jet...
I've been worried about something ever since I started using FCR. This is how to return the pilot screw. The other day,when I was synchronizing,I noticed something,so I'll write it down. There are few people who specifically write about how to decide on slow jets and pilot screws.
カテゴリ
Biker&Others FCR tuning - Acceleration pump adjustment - If it is too fast,it will hit the throttle valve....
Write down what will hit you first. I found a case the other day,where the fuel injection from the FCR's accelerator pump hit the throttle valve. The fuel is not being sucked into the engine,but is instead hitting a door called the throttle valve.
カテゴリ
FCR FCR Tuning - Synchronization - 2022-10-03...
When I went touring the other day,I touched the AS air screw,PS pilot screw,and idling stop screw,so I thought that the synchronization might be loose,so I made time to do it from 17:00 to 18:00. I synchronized while being careful not to be unable to work due to sunset.
カテゴリ
Cowl CBX400F Integra cowl installation - leftover parts for naked...
When I was cleaning up my room,I came across some parts that I haven't used recently. These are the leftover parts from CBX1000's CBX400F Integra cowl specification. Parts for naked style.
カテゴリ